Haltech Dash

August 2013: I fitted a new Haltech IQ3 dash for data logging. Whilst most of the dash data comes from the ECU via the CAN bus, I also fitted a fuel and Oil Pressure sensors.

December 2013: The dash has developed its own personality - I set the engine temperature to be displayed in degC and it saves OK and happily displays the correct temperature - a few cycles of the ignition on/off and it decides that the engine temperature is better off in degF - The first time it did this I nearly died when i looked at the temperature. After a call to Haltech it appears this is a known issue and i have to return the dash to be updated.